PEEK Polymerization | Compounding| Extrusion | Compressed molding | Injection molding | Machining
Contact usPoly (ether ether ketone)(PEEK) is a linear polymer whose main chain is composed of Aryl, ketone and ether bonds. PEEK has a large number of benzene rings in its molecular chain, so its heat resistance can match that of polyimide, while two ether chains and a renegade group provide the material with flexibility and excellent workmanship.PEEK structure is as follows：
Contact us
UNFILLED PEEK has excellent physical and chemical properties in its own right. Its characteristics of high strength, high toughness, corrosion resistance, high temperature resistance, good insulation, high purity basically meet most of the industrial environment.
Contact us
Polyether ether ketone is a thermoplastic substance that was created in 1978. Eventually, it came to market in the 1980s and has seen applications in industries as diverse as below:
Aerospace
Car
Medical
Railway
Oil and Gas
Semiconductor
UNFILLED PEEK has excellent physical and chemical properties in its own right. Its characteristics of high strength, high toughness, corrosion resistance, high temperature resistance, good insulation, high purity basically meet most of the industrial environment.
i550G is one of unfilled or natural PEEK.Outstanding chemical resistance and a high operating temperature (up to 250℃/480F) round out PEEK profile.i550G has excellent dimensional stability combined with high creep stability, ensuring the suitability of PEEK for the most sophisticated machined parts.
Compared with unfilled PEEK(i550G),this 30% glass fiber reinforced PEEK material(i550GL30) exhibits increased mechanical strength and high rigidity.Plus, improved creep strength and dimensional stability are delivered by the 30% glass fiber filled PEEK.
i550CA30 is a 30% carbon filled PEEK material that is manufactured by DONGGUAN REDSPOT PEEK. Its carbon fiber reinforcement supports the material a high level of rigidity. Carbon fiber reinforced PEEK demonstrates very high mechanical strength values.
i550FC30 black is developed especially for bearing and sliding applications. HPV PEEK is based on a PEEK polymer that has been modified with 10% each of PTFE, graphite and carbon fibres. It combines the properties of a high-grade matrix material with special, wear-improving additives.
Excellent dimensional stability
Nano ceramic filling, excellent dimensional stability, can be used for semiconductor chip test boxes, processing micropores without burrs and deformation.
iPEEK® ceramic PEEK retains the original toughness and strength of PEEK.
Commonly used brand: i770CM10 White,i770CM Tooth,i770CM Gingiva
The surface resistivity is uniform and controllable, which can meet the conventional demand of 10 5-8 ohms/square meter.
Different formula schemes can be provided according to different application requirements. Commonly used brand: ESD i770G ,ESD i550G,ESD i330G
The thermal conductivity is as low as Wm-1K-1, which can be used in applications that require thermal insulation.
Commonly used brand: i770G LR ,i550G LR ,i330G LR
Coarse powder (particle size: 500μm-800 μm) Suitable for composite modification with MI=10~80 g/10min-1
Fine powder (particle size: 70μM-100μm) Suitable for composite modification, molded with MI=20-40 g/10min-1
Micro powder (particle size: 15μM-25μm) Suitable for composite modification, pre impregnation, spray coating with MI=70-80 g/10min-1
2024 © Copyright DONGGUAN REDSPOT TECHNOLOGY CO.,LTD. All rights reserved.
中文
English
Русский
Español